Driveway location
Constant Hot Water
Easy lock Stabaliser Struts
Bathrooms 4 Hire
Specifications
Specifications for Bathroom
Download PDF
How your bathroom is connected
Once your portable bathroom is delivered on site and in position we simply require a garden tap and 240-volt power point that are no further than 30metres from the proposed site.
Sewer access (gully trap, inspection opening or boundary trap) needs to be within 40 metres from the proposed site.
Site access
The driveway must be a minimum of 5000mm long, 2400mm wide and 2700mm high (clearance). The site must be relatively level. It needs to be 0˚ - 3˚ level for the Unit to function properly. Ensure that there are no obstacles such as branches and bushes protruding into your driveway or proposed site that may hinder the positioning of the unit.
Changing the gas bottle
After extended use (approximately 70 three minute showers) the hot water may run out and the gas bottle has to be changed immediately. Simply locate the two 9kg gas bottles at the front of the bathroom and switch on the regulator from one gas bottle to another by turning the handle on top of the bottle.
Disconnect the used gas bottle. If hiring the Unit for extended periods of time you must refill or swap the gas bottle at an authorised dealer and replace it in the original position.
If you experience any difficulties please contact us immediately.
Specifications for Portable Toilet
Download PDF
Dimensions of toilet
Height |
2295mm |
Width |
1115mm |
Depth |
1175mm |
Door |
620mm |
Dimensions of the trailer with toilet
Height |
2800mm |
Width |
1700mm |
Depth |
2500mm |
Dry Weight |
360kg |
Wet Weight |
750kg |
Capacity
Waste tank* |
390litres (approx. 800 uses) |
Freshwater tank |
110 litres |
* Bathrooms4hire empties the waste tank upon the return of the unit.
Call: 0433 808 351